TOSHIBA 32LV833 - HOTEL MODE CLONE PROCEDURE
Copying a BIN file into USB flash.
Insert USB flash disk into TV USB port.
Press �MUTE� key twice (MUTE OSD disappear) then press �SOURCE� on key pad. Hotel Menu will come out.
Select the item TV to USB and press Left or Right button to set setting at �YES�. Then press �OK� button.
The hotel settings will be copied into USB disk with file name HOTEL_833X.BIN. Once copy is finished, the OSD message �Please wait...� will disappear then show "OK" message.
Press �MUTE� key twice (MUTE OSD disappear) then press �SOURCE� on key pad. Hotel Menu will come out.
Select the item TV to USB and press Left or Right button to set setting at �YES�. Then press �OK� button.
The hotel settings will be copied into USB disk with file name HOTEL_833X.BIN. Once copy is finished, the OSD message �Please wait...� will disappear then show "OK" message.
Copying a BIN file into TV.
USB to TV - Method 1
Insert USB disk with available file into TV USB port.
Press �MUTE� key twice (MUTE OSD disappear) then press �SOURCE� on key pad. The hotel menu will come out.
Select the item TV to USB and press Left or Right button to set setting at �YES�. Then press �OK� button. The hotel settings will be copied from USB to TV with file name HOTEL_833X.BIN. Once copy is finished, the OSD message �Please wait...� will disappear then show "Press OK to reset TV" message.
If you don�t have any action. 10 second later. The system will auto reset TV .
Press �MUTE� key twice (MUTE OSD disappear) then press �SOURCE� on key pad. The hotel menu will come out.
Select the item TV to USB and press Left or Right button to set setting at �YES�. Then press �OK� button. The hotel settings will be copied from USB to TV with file name HOTEL_833X.BIN. Once copy is finished, the OSD message �Please wait...� will disappear then show "Press OK to reset TV" message.
If you don�t have any action. 10 second later. The system will auto reset TV .
USB to TV - Method 2
Insert USB disk with available file into TV USB port.
Reboot (AC Off/On) TV to update hotel settings automatically. During upgrading the steps will be indicated on the display.
When upgrade is finished. There is a message of �Update Finished� will show on display.
Remove USB disk then turn AC Off/On to reboot TV. The new settings will be active.
Reboot (AC Off/On) TV to update hotel settings automatically. During upgrading the steps will be indicated on the display.
When upgrade is finished. There is a message of �Update Finished� will show on display.
Remove USB disk then turn AC Off/On to reboot TV. The new settings will be active.
Internal Working Method
If USB disk is found. The boot code will check that file name HOTEL_833X.BIN exist in it. if it is, then the whole file size 64K bytes will copy to DDR memory first.
Copy the settings into specific address of FLASH.
As boot code is also able to upgrade firmware over USB. If both of the available firmware file and hotel BIN file are exist in USB disk. The first priority will be firmware upgrade. Therefore, Copying hotel settings will be ignored. Be aware. Removing available firmware file from USB disk before copying hotel setting.
If USB disk is found. The boot code will check that file name HOTEL_833X.BIN exist in it. if it is, then the whole file size 64K bytes will copy to DDR memory first.
Copy the settings into specific address of FLASH.
As boot code is also able to upgrade firmware over USB. If both of the available firmware file and hotel BIN file are exist in USB disk. The first priority will be firmware upgrade. Therefore, Copying hotel settings will be ignored. Be aware. Removing available firmware file from USB disk before copying hotel setting.
Great, these are really useful tips and tricks. Will be using them for sure. thanks for sharing such informative post with us..
BalasHapus